CHECK OUT OUR MACHINE WORK!
Remember, at Brothers VW Machine
Shop we specialize in Machine Work, Head Port/Polish, Engine Builds,
as well as many other services! If you need something done, and
do not see it list here, that does not mean we can not do it.
It never hurts to ask! Feel free give us a call or send us an
email. Let us see how we can help you today!
ENGINE CASE PRICES:
Engine Case (New Type 1 Brazilian
AS41) = $795.00
Bore Engine Case to 90.5mm / 94mm Pistons = $85.00
Stroker Clearance Engine Case to 86mm Crank = $95.00
Deck Engine Case = $60.00
Drill / Tap / Plug Oil Galleries = $80.00
Case Savers (Drill and Tap Engine Case) = $85.00
Full Flow (Drill and Tap Engine Case) = $55.00
Alignbore Engine Case = $85.00
Lower Lifter Bosses = $45.00
Sand Seal Case w/Seal = $55.00
Shuffle Pin Center Main = $95.00
Sleeve Lifter Bores (Silicone Bronze) = $185.00
Sleeve Lifter Bores w/Groove (Silicone Bronze) = $225.00
Weld Full Flow for T3 = $150.00
Weld Plate Behind Cylinder #3 - $70.00
REBUILD / REGROUND PRICES:
T1 Connecting Rods (1600)= $70.00
T1 Connecting Rods (36HP) = $95.00
T1 Crankshafts = $65.00
T1 Single Port Head = $125.00 ($25.00 Core)
T1 Dual Port Head = $125.00 ($25.00 Core)
T1 "042" Dual Port Head = $175.00 ($25.00 Core)
T1 Stock Cam = $40.00
T1 Performance Cam, W100, W110 = $45.00
T1 Lifters (8)= $24.00
T1 Flywheel = $50.00
T4 Connecting Rods = $85.00
T4 Crankshafts = $90.00
T4 Head 1.7/2.0 = $275.00
CYLINDER HEAD PRICES:
Cut Cylinder Head for 90.5/92/94
= $65
Deck T1 Cylinder Heads = $55
Deck T4 Cylinder Heads = $60
Install New Seats on Customers Heads = $80
Install New Guides on Customers Heads = $80
Three Angle Valve Job (Stock, Per Set) = $80
Three Angle Valve Job (Performance, Per Set) = $175
Weld & Machine Head / Intake Ports (Per Set) = $200
|